Coco Flash Gel Polish 7ml

Application tips:

1. Wash and disinfect your hands and your client's hands. Put on protective gloves and assess the condition of the nails and skin.
2. Push back the cuticles using a pusher or wooden stick and prepare them with a suitable cutter.
3. Mattify the nail plate with a 100/180 grit buffer and remove dust with a soft brush.
4. Clean and degrease the nail plate with a lint-free cotton pad soaked in Cleaner No. 1.
5. Apply the appropriate primer – Acid Free Primer or Acid Primer according to the needs of the nail plate.
6. Apply a thin layer of chosen base and cure for 30 seconds in the MultiLed lamp.
7. If necessary, apply a second thicker layer of base to build or level the nail structure. Cure for 60 seconds.
8. Apply a thin layer of Coco Flash Gel Polish without pressing the brush onto the nail surface. Cure for 30 seconds in the MultiLed lamp.
9. Apply a second thin layer of color. If needed, refine the cuticle area and side ridges, then cure for another 30 seconds.
10. Apply a top coat, such as Wet Look, and cure for 30–60 seconds in the MultiLed lamp.
11. Wait approximately 1 minute after removing the hand from the lamp for the top coat to cool.

Composition:

Polyether Urethane Methacrylate, PEG-3 Trimethylolpropane Triacrylate, Polyether/Polyester Copolymer, Silica Dimethicone Silylate, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica Silylate, Polyethylmethacrylate +/-CI [19140, 47000, 77000, 74260, 47005, 77007, 73360, 77891, 74160, 16035, 42090, 77491, 77742, 77492, 77499, 77346, 15850, 77849]

Warnings:

For professional use only. Read directions for use carefully before first use. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Avoid inhalation of dust during filing. Keep out of reach of children. Product may cause skin and eye irritation. May cause an allergic reaction.