Hot Dot Top Coat 7ml

APPLICATION TIPS:

1. Wash and disinfect your and your client’s hands. Put on gloves. Assess the condition of the client’s hands and nails and check if there are any contraindications to the treatment.
2. Push back the cuticles using an e-file or a wooden stick and work on them with e-file bits, e.g., Cuticle 9, Cuticle 1.
3. Use a 100/180 grit buffer to buff the nail plate thoroughly.
4. Remove excess dust with a soft brush.
5. Use a lint-free cotton wipe and a purple cleaner to dehydrate the nails thoroughly.
6. Apply a properly selected primer (Acid Free Primer or Acid Primer).
7. Apply a thin layer of the selected gel polish base and cure it in the lamp (curing time should be adjusted to the parameters of the used lamp).
8. If your nails require an overlay, choose any builder base, e.g., Protein Base or Mineral Base and apply an overlay. Remember to extend the curing time to 60 seconds in the MultiLed lamp.
9. Apply the selected gel polish colour layer by layer, curing each of them in the lamp (curing time should be adjusted to the parameters of the used lamp).
10. For a matte finish, use Stracciatella Top Coat. Since the top coat has no dispersion layer, there is no need to wipe it with a product that adds a finishing gloss.
11. Keep in mind that the top coat needs to cool down once it is taken out of the lamp.