Quick Stamp - Influencer 7ml

Application tips

1. Remove the protective foil from the stamping plate and clean the surface with acetone or Cleaner No. 1.
2. Apply the stamping polish over the chosen design and remove the excess with a scraper using one firm motion.
3. Pick up the design with the stamper using a gentle rolling motion from one side of the pattern to the other.
4. Check that only the selected design has transferred to the stamper. Remove any unwanted elements using the edge of the scraper if necessary.
5. Transfer the design onto the nail. The design can be stamped onto a cured gel polish layer wiped with Cleaner 2 or onto a nail finished with any cured top coat.
6. Seal the design with a thin layer of Tip Top.

Composition

Butyl Acetate, Ethyl Acetate, Dihydrolevoglucosenone, Nitrocellulose, Acetyl Tributyl Citrate, Isopropyl Alcohol, Adipic Acid/Neopentyl Glycol/Trimellitic Anhydride Copolymer, Stearalkonium Bentonite, Acrylates Copolymer, Phthalic Anhydride/Trimellitic Anhydride/Glycols Copolymer, n-Butyl Alcohol, Benzophenone-1, Silica, Mica, Diacetone Alcohol, Stearalkonium Hectorite, Polyvinyl Butyral, Trimethylpentanediyl Dibenzoate, Tin Oxide, Maltol, Phosphoric Acid, +/- CI [77491, 77891, 77510, 15850, 15880, 19140, 77000, (nano) 77266, 42090, 60725]

Warnings

For professional use only. Read directions for use carefully. Keep out of reach of children. Flammable product. Keep away from sources of ignition. Use only in well-ventilated areas.